LOGO SILVER ALLTRACK M3 Series, Руководство пользователя

Страница: 26 / 48

26
JOYSTICK
Please refer to the input device Owner's Manual provided with
the information package.
1. ADJUSTING DEPTH
(Fig.1)
a) Loosen adjustment handle (A).
b) Slide joystick mount horizontal rod in/out (B) until the
desired position.
c) Tighten adjustment handle (A).
!
WARNING
The joystick cable should be positioned so it is protected from
impact. Route cables to avoid pinch points and do not
over-tighten cable ties when attaching to armrest.
2. USING SWING-AWAY FUNCTION
(Fig. 1-2)
a) Push release lever (C).
b) Continue pushing until the joystick bracket is fully retracted.
c) To bring back, pull joystick firmly toward you until it is
back into its locked position and a click is heard.
Fig.1
A
B
C
3. ADJUSTING HEIGHT AND ROTATION
(Fig.3)
a) Loosen securing screw (D) with 5 mm Allen key.
b) Slide swing-away arm up/down on vertical rod (E) to
desired position. Rotate swing-away arm left/right on
vertical rod (E) to desired position.
c) Tighten securing screw (D) applying
95 lb/sq. inch ± 15 torque.
4. CHANGING ANGLE OF JOYSTICK MOUNT
(Fig.3-4)
Changing the angle from 0° to a 35° (Fig. 4)
or from 35° to 0° (Fig.3).
a) Loosen both securing screws (F) on swing-away arm
bracket with a 5 mm Allen key.
b) Remove the screw (F1) completely. Align swing-away
arm to desired hole. Insert screw (F1) in bottom hole of
bracket for a 35° angle (Fig. 4) or in middle hole for 0°
angle (Fig. 3).
c) Tighten both securing screws (F) applying
95 lb/sq. inch ± 15 torque.
5. ADJUSTING JOYSTICK USING ROTATING BALL
(Fig.2)
a. Lightly loosen 3 securing screws (G) on rotating ball
ring, one at a time, with a 1/8 Allen key.
b. Position joystick to desired position. You may achieve the
desired position after loosening only one screw.
c. Tighten screws.
Fig.2
Joystick
Horizontal rod
Rotating ball
Swing-away arm
Vertical rod
B
E
Release lever
C
G
Fig.3
Rotation
Swing-away arm
D F
Height
0° angle
Fig.4
35° angle
F
1
2
35°
E
E