LOGO SILVER ALLTRACK M3 Series Скачать руководство пользователя | Manualshive

Страница: 12 / 48

12

CENTER OF GRAVITY (CG)

!

WARNING

The point where a power wheelchair will tip forward, back, or to
the side depends on its center of gravity and stability. The center
of gravity is affected by:

1. The seat height and seat angle.
2. A change in your body position, posture or

weight distribution.

3. Using the wheelchair on a ramp or slope.
4. The use of a back pack or other options, and the amount of

added weight.

5. Drive wheel positioning.

!

WARNING

• Elevating, tilting and legrest adjustments can affect the

wheelchair centre of gravity. Under certain conditions this
might cause instability that could lead to unintentional tipping
causing personal injury to the user and/or the people
nearby.

• Stopping distances on slopes can be significantly longer than

on level ground.

ADJUSTING

CG

ALWAYS consult a professional if your Alltrack needs adjusting.

TO REDUCE THE RISK OF FALL OR TIP-OVER

Whenever a condition exists that may change the CG:

• Reduce speed, proceed cautiously and when in doubt,

ALWAYS have someone help you.

• Consult a profession to have your Alltrack serviced.

TRANSFERS

!

WARNING

It is dangerous to transfer on your own. It requires good bal ance
and agility. Be aware that there is a point during every trans fer
when the wheelchair seat is not below you. To prevent a fall:

1. ALWAYS turn off power before you transfer to or from your

wheelchair. If you leave the power on, you may touch the
joystick and cause your wheelchair to move when you do not
expect it.

2. Make sure freewheel release levers are engaged. This keeps

the power wheelchair from moving when you transfer.

3. Work with your health care professional to learn

safe methods.

4. Learn how to position your body and how to support yourself

during a transfer. (See Fig.1 below for recommended transfer

position).

5. Have someone help you until you are sure you can safely

transfer on your own.

6. Move your wheelchair as close as you can to the seat you

are transferring to. If possible, use a transfer board.

7. Rotate the front casters until they are as far forward

as possible.

8. Be careful of the footrests. If you can, remove or swing them

out of the way.

9. NEVER stand on foot platform/footplate(s) when you

transfer. Doing so may damage them or cause your

wheelchair to tip.

10. Make sure your feet do not get hooked on or caught in the

space between the footplates.

11. Make sure armrests do not interfere.
12. Transfer as far back onto the seat surface as you can. This will

reduce the risk that you will miss the seat or fall.

Figure 1.

Use caution when transferring to

and from your wheelchair.

«
...
10
11
12
13
14
...
»

Содержание ALLTRACK M3 Series

















































Отзывы:

Нет отзывов

Похожие инструкции для ALLTRACK M3 Series

Quickie Q700-UP M

Бренд: Sunrise Medical Страницы: 28

Бренд: Handicare Страницы: 52

Бренд: Glide Страницы: 31

Бренд: Rascal Страницы: 30

Бренд: Quantum Rehab Страницы: 28

Бренд: Quantum Rehab Страницы: 53

Rigid Aero Z Series

Бренд: TiLite Страницы: 102

Anchor Bath Chair

Бренд: Circle Specialty Страницы: 4

Бренд: Days Страницы: 12

Бренд: Motion Composites Страницы: 24

Бренд: Drive DeVilbiss Healthcare Страницы: 12

Бренд: Drive Страницы: 4

Бренд: Drive Страницы: 8

Бренд: AAT Страницы: 40

Бренд: Vitea Care Страницы: 6

Бренд: Unwin Страницы: 28

Бренд: SPEX Страницы: 16

Бренд: SPEX Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды