5
380 mm
975 mm
615 mm
1210 mm
380 mm
975 mm
615 mm
1210 mm
A
B
Box holder
The rotator can be equipped with one or two sets of box holders,
adjusted for different box sizes. When loosening the screw (A),
the box holder can be moved between the two different positions.
NOTE!
The screw has to be tightened, before using the product.
Setting of distance between box holders
Fork span 560 mm: Fits the box widths 800 or 1000 mm.
Fork span 680 mm: Fits box widths 1000 or 1200 mm.
Setting of height
The box holders can be placed in two different heights
It is important that the box holders are placed approx. on the level of or
•
above the load centre of the load.
If possible, use two box holders in each side
•
1) When the weight of the load is between 800 and 1000 kg.
2) For high boxes or when the material of the box is unstable, e.g. cardboard
NOTE!
If the box holders have no clamps, the load is not allowed to be tilted more
than 60º to each side.
Box holders with clamps
If the box can fall off, or if it has to be tilted more
than 60º, box holders with clamps have to be used.
Box holders with clamps can grip, hold and rotate
boxes with different heights.
The clamps are placed on the frame of the box and
tightened when the box is lifted up (no contact to
the floor).
Box holder with
clamps – upper position
Box holder with
clamps – lower position
Содержание LOGIFLEX ELF
Страница 1: ...LOGIFLEX ELF ELFS Rotator ...
Страница 29: ...29 ...
Страница 30: ...30 ...
Страница 31: ...31 ...