logitrans LOGIFLEX ELF, Инструкция по эксплуатации

Страница: 21 / 32

21
6.5 Adjustment of steering wheel chains
- Set the handle in its middle position.
- Adjust the nuts (1, 2, 3 and 4) and bring the
wheels into parallel.
6.6 The hydraulic pump and the gear motor
The hydraulic pump has a S3 “periodic intermittent duty” of 10%. This means that
the pump in total is allowed to operate 1 minute for a period of 10 minutes. If the
pump operates more than 10%, the motor will be damaged due to superheating.
Bleeding the hydraulic system
With a load of 50-100 kg, the forks must be raised and lowered to top and bottom
position 2-3 times.
Gear motor of Rotator
The gear motor has a ”short time under constant load” of 10 minutes (S2=10 min -
utes). This means that the motor is allowed to operate with the maximum load for
10 minutes. Hereafter it has to be cooled down to normal temperature.
NOTE! The motor will be damaged by superheating, if it operates for a longer
time or if it is not cooled down.
6.7 Cleaning
When cleaning the Logiflex, do not direct the jet onto bearings and seals. Other -
wise the grease will be washed out and the life of the equipment shortened.
Cleaning of the plastic screen (polycarbonate)
The screen is to be washed with slightly warm water added a neutral cleaning ma -
terial, and afterwards washed with clean water.
Use a soft sponge, a woollen cloth or a wash leather.
Never use sharp objects or
solvent cleaners when cleaning.