20
18
6.3 Fork adjustment
Two of the rollers on the fork bracket are mounted on eccentric
pins, so that they can be adjusted. The adjustable rollers are at
the top.
1. Loosen screw (pos. 91) (key width 5 mm).
2. Eccentric pins (pos. 56) (key width 8 mm) can now be turned
to give the necessary fork adjustment.
3. Adjustment must be made on both sides to ensure uniform
loading of the rollers.
6.4 Adjustment of lifting chain
The chains shall be adjusted so that
- they lift equally
- they are equally tight
- The lifting movement has to stop in the cylinder, before the
mast rolls touch the top stop.
After adjusting, please check:
a: Fork bracket: the forks have to be placed above the
wheels (adjustment, please see 6.3)
b: Adjustable carriage: the forks are to be kept clear of the
floor (adjustment, please see 6.3)
The nuts (pos. 18) are to be adjusted
(nut M12, key width 19 mm).
Содержание LOGIFLEX ELF
Страница 1: ...LOGIFLEX ELF ELFS Rotator ...
Страница 29: ...29 ...
Страница 30: ...30 ...
Страница 31: ...31 ...