User Manual
Harmony 890 Pro
3. Click
Change
beside the scene. This allows you to add or remove Z-wave devices from a scene
as well as adjusting the dimmable z-wave devices.
4. Click
Next
after making all your desired changes.
5. Click
Done
.
To add a new Scene:
1. Click
Modify Settings
on your home page.
2. Click
Modify
under the Scenes column.
3. Click
Add Scene
on the Scene Setup page.
4. Type the name of the scene in the text box provided.
5. Click
Save
.
6. Select the Z-Wave devices to add to the Scene.
7. Adjust the slider to set the state of the device. Far left = Off, middle = 50%, far right = On
8. Click
Next
.
Mapping a scene to an activity
Mapping a scene to an activity tells the remote to play that particular scene at the beginning of the
selected activity. For example, if you want the remote to turn off all the lights in the living room when you
watch a DVD, you could map the "Living Room Off" scene to the Watch DVD activity.
To map a scene to an activity:
1. Click
Modify Settings
on the home page.
2. Click
Modify
under the Scenes column.
3. Click
Map Scene to Activity
.
4. Map the desired scene to an activity by clicking the drop down under the Scene column.
5. Click
Save.
Note:
It is not possible to map a scene to the end of an activity or when you press the OFF
button.
Once you have powered your system off, you can manually launch a scene by doing the following:
1. Press
the
Activities
button on the remote.
2. Press
RF Control
from the LCD screen.
3. Select the scene using the soft buttons on either side of the LCD.
4. If you do not see the scene you are looking for, try selecting
Change Room
to look for scenes in
other rooms.
Using the Glow Button
Press the
Glow
button to light up or turn off the display backlight. Use the Harmony Remote Software to
determine the length of time the backlight stays on.
v. 1.0
page 11
