21
Adjusting The Rinse Aid Setting
The rinse aid reservoir has five settings. Both the recommended setting and the factory setting is “4.” If the
dishes are not drying properly or are spotted, adjust to the next higher number until your dishes are spot-
free. If you fine they are spotted with rinse aid when the cycle has finished the reduce the level.
1. With the dishwasher switched off press and hold the PROGRAM
button.
rinse aid
level
rinse aid
dose
rinse aid level indicator
1
No rinse aid
released
2
1 dose is
dispensed
3
2 doses are
dispensed
4
3 doses are
dispensed
5
4 doses are
dispensed
Switch on while
holding PROGRAM down
Press and hold
2. While holding the PROGRAM button down press the POWER
button to switch the dishwasher on.
Switch on while
holding PROGRAM down
Press and hold
3. Keep holding the PROGRAM button down until you see all
the LEDs flash TWICE. Then the display will show the current
rinse aid setting. The factory setting is P4.
4. Press the PROGRAM button to scroll through the levels.
5. To save the setting press the Power button.
Logik Integrated Diswasher LID45W18 Manual.indd 21
07/12/2018 12:12