33
* All images are for reference only; please refer to your individual unit for actual item.
Internal Care
Filtering System
The filtering system in the base of the wash cabinet retains coarse
debris from the washing cycle. The collected coarse debris may cause
the filters to clog. Check the condition of the filters regularly and
clean them if necessary under running water.
1. Ensure the dishwasher is switched off.
2. Turn the coarse filter anti-clockwise and gently lift it out.
3. Gently lift the metal filter and pull out.
4. The centre of the filter can be removed by gently pulling it apart.Rinse all the filters under running
water, including the filter cylinder, and then refit all filters in the reverse order.
5. Carefully refit the main filter.
6. Gently turn the coarse filter in clockwise direction until the arrows align and it clicks into place.
Follow the steps below to clean the filters in the wash cabinet.
• Do not over tighten the filters.
• Put the filters back in sequence securely, otherwise coarse debris could get into the system and
cause a blockage.
• NEVER
use the dishwasher without the filters in place. Improper replacement of the filters
may reduce the performance level of the appliance and damage dishes and utensils.
Logik Integrated Diswasher LID45W18 Manual.indd 33
07/12/2018 12:12
