23
The volume level of Dolby Digital is fixed, therefore you cannot use the volume control buttons
when you watch programming with Dolby Digital.
Audio Description
1. Press the
MENU button to enter the Setup menu.
2. Press the
buttons to select Sound in the section bar. Press the buttons to select Audio
Description.
3. Press the
OK button to switch on audio description for all channels that provide it. Switch
audio description off by pressing the
OK button again.
4. Press the
BACK button or the EXIT button to exit the main menu.
Dolby Digital
1. Press the
MENU button to enter the Setup menu.
2. Press the
buttons to select Sound in the section bar. Press the buttons to select Dolby
Digital.
3. Press the
OK button to switch on the Dolby Digital surround sound output from the SPDIF and
HDMI sockets, for all programmes that provide it (channels with Dolby Digital sound available
show the
in the information bar). Switch off Dolby Digital by pressing the
OK button again.
Only turn this on if you have connected your unit to a product that supports Dolby Digital.
When Dolby Digital is set to off and you watch programmes with Dolby Digital sound the unit
will decode the audio for you.
4. Press the
BACK button or the EXIT button to exit the main menu.
Lip-Sync Delay Resolution
If you find the sound and picture falling out of sync, you can delay the sound output by a small
amount to compensate.
1. Press the
MENU button to enter the Setup menu.
2. Press the
buttons to select Sound in the section bar. Press the buttons to select Lip-
Sync Delay.
3. Press the
OK button to show the lip-sync delay menu on top of the normal TV picture, and
press the
buttons to alter the amount of audio delay in 10ms steps from 0-250ms. Press
the
OK button to confirm your choice and return to the sound menu.
4. Press the
BACK button or the EXIT button to exit the main menu.
Balance
You can alter the volume balance between the left and right stereo sound outputs
1. Press the
MENU button to enter the Setup menu.
2. Press the
buttons to select Sound in the section bar. Press the buttons to select
Balance.
3. Press the
OK button to show the Balance menu and then press the buttons to alter the
balance in favour of the right side (positive) or left side (negative). Press the
OK button to
confirm the setting.
4. Press the
BACK button or the EXIT button to exit the main menu.
LHDFSAT11_IB_110725.indd 23
25/07/2011 10:15 AM
