![Logik LHDFSAT11 Скачать руководство пользователя страница 11](http://html1.mh-extra.com/html/logik/lhdfsat11/lhdfsat11_instruction-manual_1935403011.webp)
11
Initial Setting
Plug In and Switch On
Switch your TV on and select the HDMI or SCART input.
Insert
the mains adapter to the rear of the unit and plug into a mains
socket and switch on. The blue LED indicator will illuminate. The
first freesat installation screen will show on the television screen
after a few seconds.
First Time Installation
1. When the first freesat installation screen is
displayed, press the
buttons to select the
screen format of your TV (16:9 Widescreen or
the squarer 4:3 Traditional). Then press the
button to highlight the HDMI Resolution selection
box, and then press the
buttons to select
the correct resolution for your TV. Press the
OK
button to display the next installation screen.
• Ensure that the satellite dish cable is connected to your
unit before starting the first time installation.
• Please take some time to perform the first time
installation when using the unit for the first time.
2. The signal check screen shows the strength and
quality of the freesat signal received from your
satellite dish. If the signal strength or quality is
below 50%, you should check the satellite dish
connection at the back of the unit (switch the unit
off and reconnect the cable if necessary). If the
connection is OK, consult your dealer or installer.
3. When the signal strength and signal quality
shown are 50% or more, you can continue to tune
in the unit. Press the
OK button to proceed.
4. Enter your postcode using the number buttons
on the remote control, or press the
RED button
to use the on-screen soft keyboard. You do not
need to enter a space. Once you have entered your
postcode, press the button and then press the
OK button to proceed.
You should set the HDMI resolution to the highest that your TV can display (see your TV’s
instruction manual). If in doubt, set the resolution to 720p.
LHDFSAT11_IB_110725.indd 11
25/07/2011 10:15 AM