15
Shelf Positions
1. On the wall of the inner cavity there are 5
different shelf guide slots in the oven. You
can place the shelf at different heights to
achieve the best cooking performance
depending on the heat of the heating
elements and the size of food. If only the
top heating element is on, we suggest
that you place the shelf on guide 5 (make
sure that there is a minimum distance of
30 mm between the food and the top
heating element).
2. Always monitor the food during
operation to ensure that you are not
overcooking it.
3. For heavy food, use a baking pan rather
than the oven shelf.
Using the Oven
First Time Use of the Oven
Ensure that nothing has been left in the oven and that the room is well ventilated. Remove any insert cards or
plastic bags. Before connecting the power, use a damp cloth to carefully wipe the inner cavity wall and housing.
Clean all the detachable parts in hot, soapy water before using.
Heat the appliance on maximum, making sure the room is well ventilated as there may be a little smoke and
odour. This is normal, and is due to the protective substance on the appliance which protects it during shipping
from the factory. Switch the appliance off once the smoke and odour has stopped. This can take
up to 30 minutes.
• Under no circumstances should the oven be lined with aluminium foil as overheating may occur.
• Do not place dishes or baking trays directly onto the base of the oven as it becomes very hot and
damage may occur.
• Bread may catch fire if the toasting time is too long. Close supervision is necessary during toasting.
• During use, this appliance becomes hot. Care should be taken to avoid touching hot surfaces,
e.g., oven door, heating elements.
• Accessible parts may become hot when in use. Children should be kept away.
• Do not leave the handle in position when grilling. If the handle is left in position when grilling,
it will get very hot.
Guide 5
Guide 4
Guide 3
Guide 2
Guide 1
Replacing the Anti-tilting Oven Shelf
• Insert the shelf at an angle with the vertical section to
the rear to clear the stops at either side of the guide slot.
Once past this stop the shelf can be placed level again.
• To remove, completely angle the shelf upward so the
shelf stop is cleared from the guide stop.
LFTG90W14_IB.indd 15
09/02/2015 17:51
