32
For the installation of the supply cable carry out the following operations:
• Release both clips then open the junction box lid.
Colours of the wires in the mains lead should correspond with
the markings identifying the terminals. Proceed as follows:
Green & Yellow wire to terminal marked “E” or .
Brown wire to terminal marked “L” .
Blue wire to terminal marked “N” .
Ensure all connections are adequately tightened. Do not over
tighten as you may risk damaging the threads.
• Fix the supply cable in the cable clamp and then close
the cover.
Electrical Connection
The cooker must be connected to the mains supply via a full disconnection switch, with a contact separation
of at least 3mm in all poles, correctly fused with a capacity appropriate to that shown on the cooker Rating Plate
and incorporated in the fixed wiring in accordance with the latest wiring regulations. All electrical wiring from
the consumer unit to the cooker, via the full disconnection switch must be of the correct rating.
Electric cookers come without a power supply cable. If your supply is different from this specified value, contact
your authorised service agent. Ensure that the electricity supply voltage on the machine is correct.
Electrical connection of the oven should only be made to connections/sockets with an earth system installed in
compliance with the local regulations. If there are no connections/sockets with an earth system in place where
the oven will be installed, immediately contact a qualified electrician to install one. The manufacturer is not
responsible for damages that will arise because of the appliance not being connected to an earth system.
The cooker can be connected to the mains only after you complete the connection at the junction box.
Live
Earth
Neutral
The following installation procedure must be carried out by a competent person. If in doubt consult a
qualified electrician. The electrical installation must comply with the IEE Regulations, Building & local
By-Laws.
The power supply cable must have these minimum
requirements:
• Type:
H05VV-F (PVC insulated and sheathed
flexible cable)
• Section: 1.5 mm
2
This appliance must be earthed.
• The mains cable must be positioned away from any hot parts at
the rear of the cooker. If this cannot be done then another method
of protecting the mains cable from the hot parts must be used
i.e. Heat resistant sleeving or high temperature cables.
* All images are for indication only; please refer to your individual unit for actual item.
LFTG90W14_IB.indd 32
09/02/2015 17:51
