SOFTWARE UPDATES
Logicube
WriteProtect BAY
User’s Manual
28
The most up-to-date instructions on updating the software can be found on the
WriteProtect support page at:
http://www.logicube.com/knowledge/WriteProtect
.
6.1.1 From Network – Via the web
1.
Disconnect all drive cables and drives from the WriteProtect
2.
Connect the WriteProtect to a network with Internet access. Set the
proxy settings (IP settings) if necessary.
The WriteProtect is DHCP enabled by default.
3.
Using the Remote Connectivity feature (see
Section 4.0
for details on
Remote Connectivity), connect to the WriteProtect.
4.
From the main menu on the WriteProtect, click the down arrow once
then click the
Software Updates
icon. A screen will appear showing the
current version of software installed towards the top of the screen.
5.
Select
From Network
. The WriteProtect will check for a newer version
on the web. If one is found, it will display the version on the screen and
the
Update
icon will be selectable.
6.
Click the
Update
icon to begin the update. A confirmation screen will
appear. Click
Yes
to continue the update.
7.
Do not interrupt the update process. It may take several minutes. Once
completed, a ‘Successful’ screen will appear.
8.
Reboot the WriteProtect by turning the unit off then back on using the
Power button.
9.
Remotely connect to the WriteProtect again, then verify the software
version at the top of the ‘Software Updates’ screen.
6.1.2 From USB Drive – Via software download
The latest software can also be downloaded from Logicube’s website and be
placed onto a USB flash drive.
It is recommended to use an empty USB flash drive.
Download the latest software from the WriteProtect’s product support page at
http://www.logicube.com/knowledge/WriteProtect
1.
Download the zip file from the download page.
