WEB INTERFACE
Logicube
WriteProtect BAY
User’s Manual
19
5.
Click the newly saved profile and click
Save
. A confirmation screen will
appear:
6.
Click the
Yes
icon to save the profile.
7.
Make sure the profile to be loaded (during the boot process) is
highlighted (in this case, REMOVABLE.DB) and click the
Load
icon. A
confirmation screen will appear:
8.
The next time the WriteProtect is turned on it will load the
REMOVABLE.DB profile.
To delete a profile, click the (delete) icon. A confirmation screen will appear.
Click the
Yes
icon to delete the selected profile.
It is highly recommended that the WriteProtect is turned off then
back on before making any changes to the profiles/configurations.
This helps ensure that only the desired changes are saved.
Do not highlight and save over the INITIAL.DB
configuration. This is the default configuration of the
WriteProtect and is used to reset the device to the factory
default settings.
