6
Note:
Use the following types of screws to fix the TOUCH cable handswitch
cylinder-head screws
round-head screws
pan-head screws
Max. diameter of thread: 5mm
Max. diameter of head: 10mm
Note:
if the screws are tightened too much or if the drill holes in the wooden plate and the
mounting holes on the handswitch are not aligned correctly, the handswitch gets deformed
and the push push function does not work properly. The correct torque to tighten the screws
must be checked depending on the used screw and wood type.
4. Connect the handswitch to the control unit using the jack marked with HS.
Caution:
unplug the power cord of the control unit while mounting the handswitch!
Note:
4 lines will be shown on the display after the TOUCH cable handswitch was connected
to the control unit and powered. Do not touch the whole user interface of the TOUCH cable
handswitch before the 4 lines on the display disappear.
Figure 5: Connection of the TOUCH-UD to a COMPACT
eco
control unit
