5
3
Mounting Instructions
Mount the TOUCH cable handswitch underneath your desktop in an appropriate position. The following
tools are required for installation:
1 screw driver
Note:
the handswitch is equipped with a shift mechanism. Mount the handswitch with the
user interface panel in the pulled out position to reach all screw holes.
1. Unpack the handswitch.
Note:
ensure eco-friendly disposal of the packaging materials (separate the plastic parts and
cardboard for collection).
2. Place the handswitch on the underside of your desktop on the desired position. Note that the
handswitch should be reached comfortably. Its front side should not protrude the desktop front edge.
Figure 3: The 2 red marked edges of the handswitch should be flush with the front edge of the desktop (or shifted backwards for
desktop plates with radius)
3. Fix the handswitch with 4 screws. Use all 4 screw holes shown below.
*)
Figure 4: screw holes for mounting the handswitch; the hole marked with *) is a long slot for length compensation during the
mounting process
