background image

26 //ADJUSTABLE BED FRAME - OWNER’S MANUAL

After this action, the batteries must be replaced.
If  you store batteries in the power supply as a backup, they must 
be replaced annually.

Press the Button on the Power Converter until the Bed Frame 
is in the Sleeping Position.

Remote Control defective 
or lost.

Parts of the Bed Frame do not   

 

 

 

 

 

 

 

move evenly.   

Make sure no persons or heavy objects are on the Bed Frame 
or in the range of moving parts.

The Bed Frames may be misaligned. Follow the instructions in 
the section “Fixing Misalignment” to realign the Bed Frames. 

WARNING

 

Moderate risk of death or serious injury to children

Operating the Power Converter or performing an Emergency Lowering using the Button on the 
Power Converter will override the Child Lock feature. This may lead to death or serious injury 
to children.
• Keep children away from moving parts
• Do not let children play with the Bed Frame

NOTICE

 

When an Emergency Lowering is performed, only the Bed Frame connected to the Power Con-
verter will be operated. You will need to perform separate Emergency Lowerings for Bed Frames 
connected by Wireless Sync. Wireless Sync Mode will be activated again afterwards.

 

Содержание SILVERlite





























Отзывы: