background image

19

ADJUSTABLE BED FRAME -  OWNER’S MANUAL //

DISASSEMBLY

To disassemble the Adjustable Bed Frame, you must first disconnect the Bed Frame from the 

mains. Then, follow the assembly instructions in reverse order. To minimize the risk of pinching 
when transporting the Side Rails, secure all moving parts with packaging tape. 
 

5. DISASSEMBLY AND 

TRANSPORTATION

TRANSPORTATION

After it has been fully assembled, the Bed Frame should only be moved short distances within 
the same room. Lifting the Bed Frame requires two people. To lift the Bed Frame:

1. 

Ensure that the Bed Frame has first been moved to the Sleeping Position.  

2.  Stand at opposite sides of the Bed Frame (long sides) and grip the Base Platform. 

NOTICE

 

Moving the Bed Frame on its side or upside down may lead to damage to the product. 
•  Only move the Bed Frame while it is in horizontal position (Platforms facing upwards)
• 

Disassemble the Bed Frame before moving it to a different location

CAUTION

 

Risk of minor or moderate injury through crushing

Tilting the Bed Frame when lifting or moving the Adjustable Bed Frame may lead to minor or 
moderate injury through crushing.
•  Keep the Bed Frame level while lifting or moving it
•  Do not attempt to lift or move the Bed Frame alone

Содержание SILVERlite





























Отзывы: