-4-
6. Pairing - First time connection only:-
a. Switch the Mode to 'CHAT', press and hold the Volume '+' and '-', simultaneously for 3 seconds.
b. Microphone connection LED (Green) will flash quickly
c. Receiver and Microphone connection LED will then light up permanently 'Green' (both of these
LED status's show connection established)
Next time when you connect you will not have to complete step 6A-C, as it will automatically pair
once you turn on the power.
7. Your PRO Command Wireless Headset is now ready to use, please set up the PS3 (Audio Set
up) to use the Wireless PRO Command headset:-
a. Press the PS button on your PS3 controller to access the menu on the PS3
b. Go to the 'Settings' menu on the PS3
c. Select 'Accessory Devices'
d. Select 'Audio Device Settings'
e. Select 'Input Devices'
f. Select the 'Pro Command Headset'
g. Press 'X' to confirm
h. Move to 'Output Devices'
i. Select the 'Pro Command Headset'
j. Press 'X' to confirm
k. Select OK
Above instructions are based on firmware ver. 4.46, other firmware versions may differ
Xbox / Xbox 360
1. Turn on your Xbox/Xbox360
2. Connect the USB connector to a spare USB port on your Xbox (Microphone receiver LED
(Green) will flash slowly)
3. Using the 3.5mm to RCA cable, connect one side of the 3.5mm jack into the rear of the receiver
4. Connect the male RCA connectors Left/Right (White/Red) to the A/V Input of your TV
