-3-
d. Select 'Pro command Wireless Headset' and 'Apply'
e. Next go to the 'Recording' Tab
f. Select 'Pro command Wireless Headset' and 'Apply'
Above instructions are based on Windows 7, other Operating Systems may differ
MAC
Note: Game volume control will be de-activated while in PC / Mac mode
1. Turn on your PS3
2. Connect the receiver's USB connector to a spare USB port on your PS3 (Receiver's LED
(Green) will flash slowly)
3. There are 2 ways to connect the receiver to your PS3:-
Method 1
a. Using the 3.5mm to 3.5mm cable, connect one side of the 3.5mm jack to the rear of the receiver
b. Connect the other 3.5mm jack to your headphone socket of your TV
Method 2
a. Using the 3.5mm to RCA cable, connect one side of the 3.5mm jack to the rear of the receiver
b. Connect the male RCA connectors Left/Right (White/Red) to the A/V input of your TV
c. Connect the PS3 A/V cable Left/Right (White/Red) into the end of the RCA connectors
(White/Red)
4. Ensure the headset is within 50cm of the receiver.
5. Press the ON/OFF button on your Headset to power it ON (Microphone connection LED
(Green) will flash slowly – once every 2 seconds)
