-2-
9. Connection Status LED
10. 3.5mm jack
11. USB Connector
12. Left/Right RCA
13. 3.5mm Audio in socket
9
10
11
12
13
No drivers are needed to set up the PRO Command Wireless Headset with PC/MAC/Xbox or PS3
1. Firstly you need to charge the Wireless Headset:
Set up of PRO Command Wireless Headset with Microphone
Charging
Fully Charged
4hrs
USB Charge Cable
1. Turn on your PC.
2. Connect the receiver's USB connector to a spare USB port on your PC/MAC (Receiver's LED
(Green) will flash slowly)
3. Ensure the headset is within 50cm of the receiver.
4. Press the ON/OFF button on your Headset to power it ON (Microphone connection LED
(Green) will flash slowly – once every 2 seconds)
5. Pairing - First time connection only:-
a. Switch the Mode to 'CHAT', press and hold the Volume '+' and '-', simultaneously for 3 seconds.
b. Microphone connection Green LED will flash quickly
c. Receiver and Microphone connection LED will then light up permanently 'Green' (both of these
LED status's show connection established)
Next time when you connect you will not have to complete step 5A-C, as it will automatically pair
once you turn on the power.
PC/MAC
6. Your PRO Command Wireless Headset is now ready to use, please set up the PC/MAC (Audio
Set up) to use the Wireless PRO Command headset:-
a. Right click 'Speaker' icon (Bottom right hand corner of Screen)
b. Select 'Playback devices'
c. A new Window will open
PC
