Logano G334X, Инструкция по установке и обслуживанию

Страница: 28 / 40

8
Environmental Protection / Disposal
Logano G334X – 6 720 811 237 (2014/05) 28
8 Environmental Protection / Disposal
Environmental protection is one of the fundamental company policies of
the Bosch Group.
Quality of products, efficiency and environmental protection are equally
important objectives for us. Environmental protection laws and
regulations are strictly observed.
To protect the environment, we use the best possible technology and
materials, taking into account economic points of view.
Packaging method
For the packaging, we participate in the country-specific recycling
systems, which guarantees optimal recycling.
All packaging materials used are environmentally-friendly and
recyclable.
Old appliances
Old appliances contain materials that should be recycled.
The relevant assemblies are easy to separate, and all plastics are
identified. This allows the various components to be sorted for
appropriate recycling or disposal.
9 Boiler inspection and maintenance
Note the following when performing preventive maintenance:
▶ Always check that the heating system is working properly after
carrying out any maintenance work.
9.1 Why is regular maintenance important?
Heating systems must be serviced annually for the following
reasons:
• To maintain high efficiency Economical operation (low fuel
consumption)
• To achieve a high level of operational safety
• To maintain the cleanest combustion
• To ensure reliable operation and a
• Long service life
Maintenance work must be carried out only by a trained and certified
installer or service company. When replacing components, only Bosch
approved Buderus components may be used. The system should be
serviced annually. The results of the inspection must be recorded in the
maintenance log (

Chapter 9.8, page 35).
9.2 Checking the flue gas system, combustion air supply,
air inlet and ventilation openings
▶ Check the flue gas system, including the combustion air supply.
▶ Check air inlet and ventilation openings.
▶ Remedy any defects immediately.
▶ Make sure that the combustion air supply and the ventilation
openings are not blocked at any point.
9.3 Inspection of the boiler and burner
▶ Perform a visual inspection of the boiler and burner for external dirt
accumulation.
▶ If dirt is found, clean boiler and burner.
DANGER: Danger to life from electric shock!
▶ When performing maintenance, label all connection
cables before disconnecting them.
▶ If cables are connected incorrectly, the system may
not operate correctly, with possibly dangerous
consequences.
Spare parts can be ordered from Bosch with the aid of
the parts list.