Grain Bag Loader Set-up Instructions
3
N31088
Initial Set-up (Cont’d)
Remove the retaining clip (1) and pin (2) from both PTO
driveline storage cradles. Remove the driveline (3).
Reinstall the pins and retaining clips into the storage
cradles.
Raise or remove the PTO driveline guard (1). Remove
the guard by removing the two retaining clips (2) and pin
(3).
Install key (1) into the keyway of the grain bag loader
shaft. Align the PTO driveline coupler (2) with the key and
slide the driveline onto the shaft.
Install the cross bolt (3).
Tighten set screw (4) securing the PTO driveline to the
grain bag loader shaft.
NOTE:
Check cross bolt (3) and set screw (4) for
tightness after the first hour of operation.
Lower or install the PTO driveline guard.
Attach the safety chain from the PTO driveline shield to
the retaining clip (5).
CAUTION:
Periodically check all guards,
shields and structural members. Replace or
repair anything that could cause a potential
hazard.
1
2
3
1
2
2
3
CAUTION:
Never use a steel hammer when
connecting or disconnecting a PTO shaft.
1
2
5
4
3
Содержание Grain Bag Loader
Страница 10: ...10 Grain Bag Loader Instructions...
