2
Grain Bag Loader Instructions
In Depots
When storing grain bags in depots, position the bags in
pairs approximately 5 ft. (1.5 m) apart and a minimum of
18 ft. (5.5 m) between pairs. 5 feet (1.5 m) is adequate
space for the unloader to operate without damaging the
adjacent grain bag. Maintaining an 18 foot (5.5 m)
spacing between pairs will allow the transport vehicle
adequate space to travel. Load the pair of grain bags
opposite from each other. When unloading the grain
bags, this will allow the unloading equipment to finish
unloading one bag and move directly over and start the
unloading of the second bag.
Initial Set-up
The PTO driveline is shipped in the storage position. The
operation hitch is also shipped in the upright storage
position.
NOTE:
Lowering the operation hitch requires two
people.
Remove the retaining clip (1) and pin and lower the
operation hitch.
NOTE:
Remove the transport wheels (if equipped) at this
time. Store wheels in a convenient location away
from the work area.
Optional winch (1) lowers and raises the operation hitch.
Install the leveling ratchet (1) between the operation hitch
and drive housing using the two pins (2) and retaining
clips (3).
WARNING:
Never attempt to make any
adjustments while the tractor engine is
running or the key is in the “ON” position in the
tractor. Before leaving the operator’s position,
disengage power to the machine and remove
ignition key.
WARNING:
The grain bag loader hitch is
heavy. Always use two people to lower and
raise the hitch.
1
1
1
2
2
3
3
Содержание Grain Bag Loader
Страница 10: ...10 Grain Bag Loader Instructions...
