70
The Heat-up function can be cancelled either automatically, when the time expires, or when the
user wishes.
When the heat-up function is cancelled automatically, a beep sounds, the decimal point of the
display turns out, and the power level of the heater remains the selected power level.
If we press the (-) key when the heat-up function is activated, the function is cancelled.
Key loc
Holding the key lock sensor
down turns the key lock function on or off. If the pilot light
associated with the
key lock sensor is on, the keypad is locked.
The locking function can be activated when the cooking levels are activated or when the cook
top is off. If the cook top is on, the key lock function locks all the sensors except the general
on/off sensor and the key lock. When the cook top is off, the key lock function locks all the
sensors, including the general on/off, except the key lock.
Unlocking the keypad
If the keypad is locked (the pilot light associated with the key lock sensor is on), holding down
the key lock
Sensor
turns the key lock function off and the pilot light goes off.
Residual heat for radiant heaters
While a temperature on the cook top glass surface is above 65ºC, this condition will be shown in
the
associated display, by means of an “H”.
If the cook top is switched off, the residual heat is shown by a static “H” in the display. If the
cook top is on, but the power level is 0, the associated display will show alternately “H” and “0”.
Operating the timer
The timer is activated by pressing the timer keys (+) or (-) up to the big central symbol
. The
timer value can be selected between 1 and 99
minutes, and can be modified at any time.
To cancel the operation of the timer, select a timer value of <00> using the sensor (-), or switch
off the timer by
pressing the corresponding sensors (+) and (-) at the same time.
Heater on timer
Power
level
Time
(sec)
1 1’12”
2 2’44”
3 4’48”
4 5’28”
5 6’30”
6 1’12”
7 2’44”
8 2’44”
