Lofra MUSD48MMG700, Руководство пользователя

Страница: 47 / 56

47
8. Please replace the components on the burner and turn the knobs on the gas tap valve.
Minimum adjustment:

FOR NATURAL GAS:
Please light the burner and turn the know at the minimum position
Please then remove the gas tap knob and turn the adjustment screw at the sides of the tap
rod until you reach the minimum required flame.
Please refit the knob and check whether the flame is stable (the flame should not go out
while turning the knob quickly from the maximum to the minimum position).
Please proceed to repeat this operation on the other remaining gas taps of the hob.

FOR PROPANE GAS:
Please switch off the burner and proceed to disconnect the cooker from the electrical power
supply.
In order to regulate the minimum with Propane gas, please verify that the screws at the sides
of the tap rods must be turned clockwise.
Once you have completed the regulation, please replace the seal on the by-passes using
some paint or similar materials.
Please read the instructions of point 9 to identify the adjustment screws.
Warning: once the test has been completed, apply the conversion label present in the
kit inside the kitchen door next to the serial number label
.