Lofra MUSD48MMG700, Руководство пользователя

Страница: 38 / 56

38
Reinstalling the Range After Service
1. Push the range into operating position, making sure the anti tip bracket is engaged
(see page 37 and following).
2. Turn on power to the range at the circuit breaker panel or fuse box.
3. Turn the gas supply valve to the on position.
ASEMBLING THE BACKGUARD
Backguard assembly instructions:
1. Remove the protective film from the backguard.
2. Place the backguard on the hob in correspondence with the references and fix the
screws S1 and S2 as in fig.1.
3. Insert from below part B and fix the screws S2 as in fig.2.
The screws are included in the backguard kit.
INSTALLATION OF THE ANTI-TILTING DEVICE
FOR 36 RANGE COOKER
Adjustable bracket
1. Insert the bolt through the bracket, adjust the length of the bolt as needed and fix it in
place by using the two provided nuts.
2. Make sure the nuts are well tightened.
3. Fix the bracket on the back of the cooker in the appropriate holes by using the four
supplied screws.