Lofra MUSD48MMG700, Руководство пользователя

Страница: 13 / 56

13

In the event of an electrical power outage, the surface burners can be lit manually.to
light a surface burner, hold a lit match to the burner head and slowly turn the Surface
Control knob to LITE. Use caution when lighting surface burners manually.
 Reset all control to the “off“ position after using a programmable timing operation.
To avoid breakage : Do NOT handle or manipulate the unit by the cooktop.
Electrical and gas equipment with moving parts can be dangerous. The important safety
instructions in this manual are intended to minimize the risk of property damage, personal
injury, and death. Be sure to read them.
Keep this manual in a handy place so you can refer to it as needed.
CABINET CONSTRUCTION
Caution: To eliminate the risk of burns or fire by reaching over heated surface units, do not
have cabinet storage space above the range.
COUNTERTOP PREPARATION
The cooktop sides of the range fit over the cut-out edge of your countertop.
Countertop must be level. Place a level on the countertop, first side to side, then front to
back. If the countertop is not level, the range will not be level. The oven must be level for
satisfactory baking results. Cooktop sides of range fit over edges of countertop opening.
REPLACEMENT PARTS
Only authorized replacement parts may be used in performing service on the range.
Replacement parts are available from factory authorized parts distributors. Contact the
nearest parts distributor in your area.