Loewe Individual 32 Compose Sound 3D, Руководство по эксплуатации

Страница: 21 / 166

21 -
english
Connecting the TV set to the home network
You can connect your TV set to the home network by a wired connection
(Ethernet, Powerline) or by a wireless radio connection (WLAN). Please
contact your specialist dealer for more information on Powerline.
For the network adapter configuration, see page 71.
➠
Under no circumstances may the TV set be wired and at the same time
connected by a wireless connection to the same network, e.g. router.
This may cause severe operational faults.
Example for a wired connection
Connect the LAN socket of your TV set to the LAN switch/router of your
home network with a network cable (available from your dealer).
Example for a wireless connection
You can connect the TV set to your home network by a wireless radio
connection via the WLAN antenna inside the set.
Connecting speakers
The TV set (exception Individual 32) is delivered ex-factory without speak-
ers. Various options are available for connecting speakers to your set.
As an accessory you can obtain a Loewe system speaker
Stereospeaker I
Sound for certain set sizes
(1
which can be fitted underneath the set and
connected to the System speaker connection. See the assembly instruc-
tions for the Loewe system speaker for further information.
If you want to use other speakers, two speakers can be connected to the
speaker connections (screw terminals) of the TV set
(2
(min. 4 Ohm / min.
20W Sinus).
Speaker systems or active speakers can be connected to the
AUDIO LINK
connection.
How to configure and connect speaker systems or active speakers is
described from page 123.
Connecting external speakers to the screw terminals
(2
To connect the speakers, switch the TV set off with the mains switch and
pull out the mains plug.
The bridge plug on the system speaker connection must be plugged or
remain plugged.
You have connected and laid the connecting cables at the speakers.
Turn the 4 screw terminals anticlockwise about 2 or 3 turns. The con-
nection openings for the speaker connecting cables are laid free.
Make sure that no open cable ends get inside the set when connecting.
Avoid short-circuiting between the individual screw terminals.
Push the connecting cables (max. 1.5mm
2
) of the speakers under the
same coloured screw terminal (red to red, black to black). Also note the
connection labels of the speakers Right and Left and the symbols “+”
equals red and “–” equals black (see figure).
Make sure that the sheaths of the connecting cables are not acciden-
tally pinched.
Tighten the screw terminals in clockwise direction.
Initial installation
LAN switch/router
Homeserver,
e.g. PC
TV set
Wi-Fi router
Homeserver,
e.g. PC
TV set
(1 Equipment and upgrade options, see page 150.
(2 not possible for Individual 32.