Loewe 3D Orchestra 3.1 IS, Руководство по эксплуатации

Страница: 25 / 116

3D Orchestra
Instruction manual
English
25
Troubleshooting
Problem Possible cause Remedy
Not working at all. Power cable of the speaker loose or discon-
nected. Plug the mains cable into a socket
220-240 V 50/60 Hz.
LAN cable between TV set and Module 3D
Orchestra Controller is not plugged in. Using the supplied LAN cable, connect the
DIGITAL AUDIO LINK socket of the Module
3D Orchestra Controller to the DIGITAL AUDIO
LINK socket on the TV set.
No sound. The 3D Orchestra sound system is not set up
correctly. Repeat the room acoustic measurement (page
22).
The volume is set to minimum. Increase the volume.
The sound is set to mute.
Press or V+ on the remote control to re-
activate the audio output and then adjust the
volume level.
One or more speakers are not connected to
your 3D Orchestra system, e.g. after a system
upgrade. Press the reset button on the 3D Orchestra spea-
ker or on the 3D Orchestra subwoofer. Repeat
the room acoustic measurement (page 22).
The wireless connection is faulty. Other devices nearby use the same frequency
range. Rotate the devices in different directions in order
to reduce interference to a minimum.
Switch off other devices that may interfere.
The unit is not working properly. Unplug the mains plug from the mains socket
and then try plugging it in again after 30 seconds.
The surround sound pattern is too weak.
The surround sound is unclear. The audio source (e.g. Blu-ray player) is set
to stereo. Change the settings on the audio source to a
surround audio format.
The Sound mode is set to TV speakers or
Front .
Set the Sound mode to 3D Surround (page
23).
One or more 3D Orchestra speakers are not
connected to the mains. Check the power supply of your 3D Orchestra
speakers.
The audio content being played is not recorded
in a surround sound format. No remedy.
„
Troubleshooting