Loctite MM25, Руководство по эксплуатации

Страница: 27 / 40

27
4 Installation
4.1 Environmental and operating conditions
– Keep product feedlines as short as possible. The shorter the feedline, the lower the
loss of pressure
– and the shorter the required filling time.
– Avoid kinking of feedlines and pressure hoses.
– Typically, the pressure hose and product feedline should be no longer than 2 m.
– Do not use inflexible hoses and feedlines, so that unnecessary loads on the fittings will
be avoided.
– Carefully tighten all fittings.
– Avoid exposure to direct sunlight and UV radiation!
– The equipment should be installed in a dry, dust-free place.
4.2 Dimensions
4.3 Initial start-up
Caution!
Do not switch on the dispenser until product has been delivered to it. Otherwise there is
a risk of damage to the equipment. Even a brief period of dry running can lead to the
stator being destroyed.