Loctite MM25, Руководство по эксплуатации

Страница: 25 / 40

25
2 Description
1 Mixer Connection type B
2 Screws M3x10 for end piece
3 End piece
4 Screws M3x6 for mixer connection and pressure sensor part
5 Mixer Connection and Pressure Sensor Part
6 Screws M3x6 for pump housing end part
7 Pump Housing End Part
8 Stator with anti-twist
9 Pump Housing
10 Blind Plug G1/8 with sealing
11 Vent screw M4x8
12 Sealing Ring A 4.3
13 O Ring Ø 13 x 1.25
14 Threaded Pin (2 / Pump) to fix the drive
15 Star-shaped coupling DC drive
16 Connection Cord pump - controller
17 Drive
18 Screws M3x40 sealing housing
19 Rotor Sealing Housing
20 Feedling Fitting G1/8
21 Mounting bracket
22 Pressure Sensor M4
If pressure sensors are not used, these holes are closed with screw plugs
(standard delivery).
23 Sealing Ring pressure sensor
2.2 Theory of operation
The 2K dispenser uses a rotating displacement consisting of a rotor and a stator.
A number of voids are produced as a result of the various geometries of the conveying
elements. Conveying that is either proportional to the angle of rotation or else is rpm-
dependent is produced by the rotation of the rotor in the stator.
Since the direction of flow is reversible, the medium can be sucked back to allow a clean
break of the product. Self-sealing depends on the viscosity.