Loctite CL15 UV, Руководство по эксплуатации

Страница: 12 / 22

5. Operating the Unit, (continued)
At this time the operating parameters can be changed, or the existing parameters can be
utilized. The footswitch can now be pressed or PLC output operated to initiate the
operation of the curing unit.
Using Foot Switch / Remote Device
The shutter can be actuated using a foot switch or by other external devices such as a
PLC. The foot switch connection is made up of a 9 pin D connector. In timed mode,
making a momentary dry-contact relay closure across pins 1 and 9 will initiate cycling
of the shutter.
In manual mode, the shutter will remain open for as long as the pins 1
and 9 are connected.
Front Panel Controls
The system hours and lamp hours can be viewed by pressing the ENTER button. The
system hours are a non-reset able timer that tracks the age of the unit. The lamp hour
indicator is a reset able timer to aid in tracking the life of the bulb. The resetting of the
lamp hours can be done in a later function, see "Lamp Hour Reset". To escape from this
screen either press the
ENTER button to cycle through the system settings or wait 7
seconds to return to the main display.
The front control panel allows access to all of the unit
’
s functions. To access these
functions and make changes press the ENTER button twice. The user can cycle through
all the functions and parameters of the unit by continuing to press the ENTER button.