5
INSTALLING THE LOCKSET
Step 1
1
2-3/8"(60mm)
2-3/4"(70mm)
(a)
I. Push the crank (a) to
extend the deadbolt (b)
Push the shaft (a) to adjust
the lockset to 2-3/8"(60mm)
or 2-3/4"(70mm).
II. Hold the metal plate (c)
and twist the deadbolt
body (d) clockwise till it
snaps to 2-3/8"
III. To return to default status,
while the deadbolt (b) is
extended, hold the metal
plate (c) and twist the dead
bolt body (d) counter-clock-
wise till it snaps to 2-3/4"
2-3/4"
(70mm)
2-3/8"
(60mm)
Note: the shaft's horizontal
and vertical aligment must be sustained during
installation to ensure latch will fully extend and
lock securely.
Measure the distance between center of front door hole to the edge
of your door hole to determine the backset. Adjust latchbolt
F
and
deadbolt
J
according to the backset of your door.
Deadbolt Adjustment
J
b
a
c
d
c
d
Latchbolt Adjustment
F
