Locinox SlimStone-X, Руководство пользователя

Страница: 15 / 71

EN
SlimStone-X
15
15. TROUBLESHOOTING
PROBLEM SOLUTION
• When I try to add a new PIN code or change
the timings of a relay, I always get an error (digits
flashing 3 times)
• Verify the cabling between the SlimStone-X and
SwitchStone-STD. When the SlimStone-X cannot
communicate with the SwitchStone-STD, all leds
will flash 3 times.
• All lights are flashing • When wrong codes have been entered
repeatedly, the SlimStone-X is temporarily
blocked.
See paragraph 11
• The SlimStone-X lighting is off after pushing a
button
• Verify the power supply connection
• The SlimStone-X does not react after entering
the code
• Entering a code must always be confirmed
with [#]
• The sequence light remains lit • Check if the cables of the override button are
insulated
• Possibly you set a time of 99 seconds
• The lights flash after entering the PIN code and
confirmation by pressing [#]
• The entered code does not match any of the
registered codes. See 8
16. FREQUENTLY ASKED QUESTIONS
QUESTION ANSWER
• Is the keypad heated? • Yes, SlimStone-X has a regulated heating system
which keeps the keys frost-free
• How weatherproof is the SlimStone-X? • SlimStone-X is designed to comply with the IP68
standard
A discarded device can either be returned to your dealer or be sent back to Locinox. This product’s
recycling fee is € 0,2.
The WEE marking on the product indicates that it may not be thrown away together with normal
household waste and must be handed over to a designated collection point for the recycling of
electrical and electronic rejects.
As manufacturer of this product, we guarantee that we have taken all the necessary steps in order
to comply with the current safety requirements for this product.