background image

5

Thank You for purchasing this water heater.  Properly installed and 

maintained, it should give you years of trouble free service.

ABBREVIATIONS USED

Abbreviations Found In This Instruction Manual:

•  UL - Underwriters Laboratories Inc.

•  ANSI - American National Standards Institute

•  NFPA - National Fire Protection Association

•  ASME - American Society of Mechanical Engineers

•  AHRI - Air-Conditioning, Heating and Refrigeration Institute

•  CAN - Canada

•  EPACT - Energy Policy Act

•  CSA - Canadian Standards Association 

This  gas-fired  water  heater  is  design  certified  by  Underwriters 

Laboratories Inc. under American National Standard/CSA Standard  

for Gas Water Heaters ANSI Z21.10.3 • CSA 4.3 (current edition).

QUALIFIED INSTALLER OR SERVICE AGENCY

Installation and service of this water heater requires ability equivalent 

to that of a Qualified Agency (as defined by ANSI below) in the field 

involved.  Installation  skills  such  as  plumbing,  air  supply,  venting, 

gas supply and electrical supply are required in addition to electrical 

testing skills when performing service.
ANSI Z223.1 2006 Sec. 3.3.83: “Qualified Agency” - “Any individual, 

firm,  corporation  or  company  that  either  in  person  or  through  a 

representative is engaged in and is responsible for (a) the installation, 

testing or replacement of gas piping or (b) the connection, installation, 

testing,  repair  or  servicing  of  appliances  and  equipment;  that  is 

experienced in such work; that is familiar with all precautions required; 

and  that  has  complied  with  all  the  requirements  of  the  authority 

having jurisdiction.”
If you are not qualified (as defined by ANSI above) and licensed or 

certified as required by the authority having jurisdiction to perform a 

given task do not attempt to perform any of the procedures described 

in this manual. If you do not understand the instructions given in 

this manual do not attempt to perform any procedures outlined in 

this manual.

PREPARING FOR THE INSTALLATION

1.  Read the General Safety Information section, page 4 of this 

manual  first  and  then  the  entire  manual  carefully.    If  you 

don’t follow the safety rules, the water heater will not operate 

properly.  It could cause DEATH, SERIOUS BODILY INJURY 

AND/OR PROPERTY DAMAGE.

  This  manual  contains  instructions  for  the  installation, 

operation, and maintenance of the gas-fired water heater.  It 

also contains warnings throughout the manual that you must 

read and be aware of.  All warnings and all instructions are 

essential to the proper operation of the water heater and your 

safety.  Since we cannot put everything on the first few pages, 

READ THE ENTIRE MANUAL BEFORE ATTEMPTING TO 

INSTALL OR OPERATE THE WATER HEATER.

2.  The  installation  must  conform  with  these  instructions  and 

the local code authority having jurisdiction. In the absence 

of local codes, the installation must comply with the current 

editions  of  the  National  Fuel  Gas  Code,  ANSI  Z223.1/

NFPA 54 or CAN/CSA-B149.1 the Natural Gas and Propane 

Installation  Code.  All  documents  are  available  from  the 

Canadian Standards Association, 8501 East Pleasant Valley 

Road, Cleveland, OH 44131. NFPA documents are also 

available  from  the  National  Fire  Protection  Association,  1 

Batterymarch Park, Quincy, MA 02269. 

3.  If  after  reading  this manual  you  have  any questions  or  do 

not understand any portion of the instructions, call the local 

gas utility or the manufacturer whose name appears on the 

rating plate.

4.  Carefully  plan  the  place  where  you  are  going  to  put  the 

water heater.  Correct  combustion, vent action, and vent 

pipe installation are very important in preventing death from 

possible carbon monoxide poisoning and fires, see Figures 

3 and 7.

  Examine the location to ensure the water heater complies with 

the Fact to Consider About The Location section in this manual.

5.  For California installation this water heater must be braced, 

anchored,  or  strapped  to  avoid  falling  or  moving  during 

an  earthquake.    See  instructions  for  correct  installation 

procedures.  Instructions may be obtained from California 

Office  of  the  State  Architect,  400  P  Street,  Sacramento, 

 

CA 95814.

6.  Massachusetts Code requires this water heater to be installed 

in accordance with Massachusetts 248-CMR 2.00: State 

Plumbing Code and 248-CMR 5.00.

7.  Complies  with  SCAQMD  rule  #1146.2  and  districts  having 

equivalent NOx requirements.

INTRODUCTION

Содержание CLN 075100





































Отзывы: