Lochinvar AMP 200-18, Инструкции по установке, пусконаладке и обслуживанию

Страница: 4 / 12

4
4.0 INSTALLING THE CORREX
®
POWER ANODE
4.1 TOOLS REQUIRED

27 mm socket and drive bar (required for removing anode)

Torque Wrench

Battery drill

10 mm drill Bit

Spade crimping tool

Standard Philips screwdriver

Small Philips screwdriver

Thread sealant
NOTE
-
An impact wrench may be required to remove the magnesium anodes – if using such a
tool the appropriate PPE must be worn.
Isolate the unit 230v at the local isolator.
Let the vessel cool down before draining and removing the anode. Hot water
can cause severe burns.
Drain the storage vessel before attempting to remove the anode.