LOBSTER SPORTS Elite Series страница 3 Скачать руководство пользователя

Страница: 3 / 6

Replacing and Installing a New Elevation Motor

Repair Instructions

Davit Center with New

Elevation motor installed.

Installing the Elevation Link

Step 1.)

Plug your new elevation motor into the Elevation

motor tab (J24). After it is plugged in- turn the Power

button on, and move your elevation until the pin sized hole

in the shaft is vertical. Turn the Power button off.

Step 2.)

Place your link over the motor shaft as shown in

the diagram below.

(

Elite 1)

Elevation Quick Disconnect J24.

Содержание Elite Series

Страница 3: ...ion Link Step 1 Plug your new elevation motor into the Elevation motor tab J24 After it is plugged in turn the Power button on and move your elevation until the pin sized hole in the shaft is vertical Turn the Power button off Step 2 Place your link over the motor shaft as shown in the diagram below Elite 1 Elevation Quick Disconnect J24 ...

Страница 5: ... not move Step 3 Use the nut and bolt you set aside from earlier to attach the elevation link to either location shown below The location differs from Elite model 1 to model 2 3 Elite 1 elevation link to yoke connection spot Elite 2 3 elevation link to yoke connection spot ...

Страница 6: ...utting The Case Back On The Machine Step 1 Lift the case over the unit and guide it over until the yoke pointer is facing the ball exit and the back panel is facing the handle assembly Step 2 Screw in all 6 case screws Case Removed Case Screws Front Rear Case Screws Side ...