User Guide
Loadsensing Wireless Tiltmeter
Version 0.1
To guarantee water tightness:
●
Lock the box by tightening screws crosswise on the lid. Adjust the screws using a
torque wrench. If this is not done properly, the base faces and cover may not be
parallel, screwing may become more difficult and the screw threads or the Helicoil
inserts may be damaged. Moreover, the O-ring (seal) may not be properly sealed
and the degree of protection against water intrusion could be compromised.
●
Screw the box at 2 Nm (the force that needs to be applied is marked on the outside
of the device) using a torque screwdriver (e.g. Ref. 1227107 from WERA).
●
Mount the antenna or cover the antenna connector with a cap.
●
Make sure the sealing ring has not been physically or chemically manipulated.
Note: There is no need to seal the GORE valve to comply with IP67/IP68.
Note: We can’t guarantee the IP67/IP68 rating if any of the above conditions are not met or
if one or several components (e.g. the GORE valve) are damaged.
Note that box screws shouldn’t be torqued more than 2 Nm. If you exceed the torque, the
Helicoil insert may be damaged. We do not recommend using electric drills or electric
screwdrivers.
BARCELONA
Viriat 47, Edificio Numancia 1, 10th floor,
08014 Barcelona, Spain
(+34) 93 418 05 85
www.worldsensing.com
11
