User Guide
Loadsensing Wireless Tiltmeter
Version 0.1
3. The device can be powered with batteries or external power. If a power supply of 5
Volts is powering the USB port, the device will be automatically powered by the
5Volts upply
General warnings
●
Follow these precautions to avoid a battery explosion or leakage of flammable liquid or gas:
○
Use the correct battery type. Dispose of the batteries according to instructions. Do not
dispose of the batteries by throwing them into a fire or a hot oven, or mechanically crush or
cut them.
○
Do not leave the batteries in an extremely high-temperature environment.
○
Do not subject the batteries to extremely low air pressure. It may result in an explosion or
leakage of flammable liquid or gas.
○
Do not short circuit the batteries. This will blow the protection fuse.
●
Batteries and equipment to be connected via the data port must meet IEC 62368-1 ES1 and PS1
requirements.
●
Equipment to be installed in restricted access areas.
BARCELONA
Viriat 47, Edificio Numancia 1, 10th floor,
08014 Barcelona, Spain
(+34) 93 418 05 85
www.worldsensing.com
9
