LNS Turbo HB, Инструкция по эксплуатации

Страница: 13 / 39

CHAPTER 2: SETTING INTO OPERATION 2-5
TURBO HB
2.5. Safety devices
The LNS Company, or its local representative, may not be held responsible for possible
accidents or property damage, whether caused directly or not, by any means whatsoever,
if certain safety devices have not been included.
2.5.1. Description
The TURBO HB conveyor has been designed with a focus on maximum safety during its handling and
complies with all EC requirements.
Safety covers and devices make access to the moving parts of the conveyor impossible during operation.
The conveyor – machine interface must ensure that the conveyor cannot run when the machine door is
open. All safety interlocks on the conveyor or machine must not be over written at anytime. The
installation of the Hinge conveyor on site must ensure the belt is inaccessible during operation. It is
recommended that an E-Stop cord is installed around the discharge area of the conveyor and integrated
to the machines safety circuit. Suitable guarding should be provided between the conveyor discharge and
the receiving chip container. See sections below for further details.
2.5.2. Layout of the safety elements on the conveyor
Designation Description
1 Drive cover
2 Top cover incline
3 Top cover load Top cover incline
4 Bearing cover Top cover load
5 End cover discharge Bearing cover
4
5
1
2
3