manualshive.com logo in svg

LNS Super Hydrobar HS 3.26, Инструкция по эксплуатации

Поделиться
Скачать
LNS Super Hydrobar HS 3.26 Скачать руководство пользователя страница 33

CHAPTER 3: INSTRUCTIONS 

3-3 

SUPER HYDROBAR HS 

 
H) 

Screw down the locking bar (69/D). 

 
I) 

By means of the lever (67/A), turn the jack opening system anti-clockwise (67/C) and  the tube will 
descend.  Once the tube is resting on the centring lugs, return the jack device (67/C) to its working 
position by turning it clockwise until it butts up against the end-stop. (Only for bar-feeders HS 6.50 
to 6.65) 

 
J) 

Place the closing lever (68/D) against the indexing ring, 

while checking that the centring lugs 

are bedding onto the plates

, then tighten the locking bar (68/E).  

 
K) 

Plug the hydraulic connector into the current working tube. 

 
L) 

Position the collector and tighten the winged screws. 

 

3.1.2. Pusher 

If it was not possible accurately to define the length of the pushers when placing the order, it may be 
necessary to cut them on site. 
 

Stripping the pushers 

Please proceed as follows to extract the pushers : 
 
A) 

Unscrew the screws (A) that hold the support cheek (B)  

B) 

Remove the support cheek (B)  

C) 

Withdraw end-of-bar spring (C)  

D) 

Withdraw the pusher disk (D)  

E) 

Remove the stop ring (E)  

 

 

 
The pusher (F) and its piston are now free and can be withdrawn from the tube. 
 

Содержание Super Hydrobar HS 3.26













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды