LNS Super Hydrobar HS 3.26, Инструкция по эксплуатации

Страница: 16 / 44

2-10 CHAPTER 2: DESCRIPTION
SUPER HYDROBAR HS
2.2. SETTING INTO OPERATION
2.2.1. Transport
Please read the safety precautions described at the beginning of this manual before
handling the following devices.
The device is delivered in two cases. One containing the hydraulic unit, the feet and the accessories, the
other containing the tube. The actual length of the tube, the length of the pushers and the interior
diameters of the guide tubes are mentioned on a copy of the manufacturing docket affixed to the
hydraulic unit.
3.42 6.42 6.65
Tube Accessories Tube Accessories Tube Accessories
Width
- 1100 mm - 1200 mm - 1200 mm
Length
- 510 mm - 1500 mm - 1500 mm
Height
- 90 mm - 1100 mm - 1100 mm
Unpacking
For practical and safety reasons, the bar feed system must be unpacked in a spacious, well-lit location.
Check to see that the lifting capacity of the hoisting crane, or lift truck, is adequate before
proceeding with the handling of the merchandise. No one should be near the hanging load,
or within the operating range of the overhead hoist/crane, forklift, or any other means used
for lifting and transportation.
1)
If the bar feed system is received in a crate, start
by unscrewing the front panel.
2) Remove the top.
3) Remove the side-walls.