LNS Super Hydrobar HS 3.26, Инструкция по эксплуатации

Страница: 29 / 44

CHAPTER 2: DESCRIPTION 2-23
SUPER HYDROBAR HS
2.4.1. Safety devices
The SUPER HYDROBAR HS bar feed system has been designed with a focus on maximum safety during
its handling and complies with all EC requirements.
Safety covers and devices make access to the moving parts of the bar feed system impossible. Safety
switches keep the bar feed system from operating when these protections are open.
The design of the switches, as well as their insertion into the bar feed system, makes it practically
impossible to bypass them.
By pressing the emergency stop button located on the remote control, the functions of the bar feed
system and the lathe are immediately stopped.
The LNS company, or its local representative, may not be held responsible for possible
accidents or property damage, whether caused directly or not, by any means
whatsoever, if certain safety devices have not been included.
Safety device for lathes with mobile headstock
Some mobile-headstock lathes withdraw the spindle
whenever they reset, which is what happens every time
they are turned on.
In such cases, the collector has to be moved back and, if
that is not sufficient, it will be necessary to clear the tube
in the loading position.
If the operator fails to do this, the collector can be
damaged. To avoid this, it is possible (on request) to
install a safety switch (S) on the front of the collector.
When the spindle (F) withdraws, it operates the safety
switch (S) fitted to the collector (E). This breaks the safety
circuit and the spindle stops moving.