4
START UP MANUAL
QUICK LOAD SERVO III
2.
Press the key
[MENU]
.
The display reads :
3.
Press the key
[3]
for
Position / Torque.
The display reads :
4.
Press the key attributed to the icon
[SET]
.
Depending on which sequence the bar feed is in when the parameter is selected, the
available functions and icons can change :
Functions
Conditions
By offset correction
By teaching
- Loading channel down
- No bar stock in the loading channel
icon
: [+/-]
icon :
[TEACH IN]
[+/-]
By offset correction
C
Press the key attributed to the icon
[+/-]
.
The display reads the current end of bar position.
C
Enter the correction value with the numerical keys. Then, press the key attributed
to the icon
[+]
to add the value, or the key attributed to the icon
[-]
to substract it.
The display reads the new end of bar position.
C
To exit the end of bar set mode, press the key attributed to the icon
[ESC].
M A I N M E N U
1 : P A R T S E T U P
2 : A P P L I C A T I O N S E T U P
3 : P O S I T I O N / T O R Q U E
4 : M I S C E L L A N E O U S
F U N C T I O N S
5 : S E R V I C E
E N D O F B A R P O S I T I O N :
3 9 . 3 7 I N C H E S
