LNS Blaze Air, Инструкция по эксплуатации

Страница: 4 / 54

3
1. SAFETY INSTRUCTIONS
x
Thoroughly follow all safety instructions of the manufacturer.
x
Do not override or remove any of the safety switches, guards or devices of the lathe or the
Blaze Air.
x
Do not service, perform any maintenance or handle any parts of the Blaze Air during
automatic cycling or with the power turned on.
x
Do not touch any part in motion.
x
Before operating the Blaze Air and the lathe in automatic cycle, always close the main cover
of the Blaze Air.
x
Do not wear any loose fitting clothing near any part in motion.
x
Spindle liners must always be used and fastened securely to the spindle.
ATTENTION:
Failure to follow the above safety instructions can result in serious personal
injury and components damage.
2. SPECIFICATIONS
Part Capacity:
Diameter: 12 - 76 mm (1/2” - 3”)
Part Length: 50 - 914 mm (2” - 36”)
Blaze Air:
Voltage/amps: 230 or 460 Volts AC, 3 Phase, 50/60 Hz, FLA =7.5, 15A
(Note: high inrush current on startup due to 3 phase Blower Motor)
Overall length: 1727 mm (67”)
Maximum width: 864 mm (51”)
Centerline Height range: 851 – 1219 mm (33.5” – 48”)
Net weight (approx.): 300 kg (660 lbs.)