15
In the example, each room has been assigned its own address group (room
A
: 11, room
B
: 12,
room
C
: 13, room
D
: 14). The awning is also allocated to room
B
with address group 12.
15 address groups are possible:
11, 12, 13, 14, 21, 22, 23, 24, 31, 32, 33, 34, 41, 42, 43
This value must
not
be set to ‘44’.
In order to be able to separately control each receiver, you need to program each one to a
single address. In addition to the address group that is already selected (room
A
: 11, room
B
:
12, room
C
: 13, room
D
: 14), a subaddress is also needed.
The following 15 subaddresses are possible for each address group:
11, 12, 13, 14, 21, 22, 23, 24, 31, 32, 33, 34, 41, 42, 43
This value must
not
be set to ‘44’.
In the example the awning is programmed to the single address 1211, which is comprised of
the address group 12 and the subaddress 11.
All the receivers in room
A
have also been programmed to a local master address (1144 in the
example).
For the local master address 44
must
always be used as the subaddress. The
address group can be set to 11, 12, 13, 14, 21, 22, 23, 24, 31, 32, 33, 34, 41,
42, or 43.
Example:
1144, address group 11, subaddress 44
All the lamps in the house can be controlled via the global master address 4444.
The awning was deliberately not programmed to this address and can therefore only be
addressed via its single address (1211). It must be operated separately in this example.
The ceiling lamps in all the rooms are also combined in a function group (4411 in the example,
address group 44, subaddress 11) and can therefore be jointly controlled.
For a function group 44
must
always be used as the address group. The
subaddress can be set to 11, 12, 13, 14, 21, 22, 23, 24, 31, 32, 33, 34, 41, 42,
or 43.
Example:
4411, address group 44, subaddress 11
