11
4. Use only appropriate containers to dispense liquids. If using small bottles, please
use a stand.
5. Always make sure that the discharge tube does not point at the user or any other
person.
6. When transporting the dispenser please ensure that the piston is in zero-position
and no liquid is in the cylinder.
The stopper cap must close the discharge tube and the volume setting system must
be set at zero-position!
Never carry the dispenser at the finger guard, only at the PP valve block!
7. Please check the correct assembling of the dispenser and the tight fit on the bottle
before use.
8. To guarantee a trouble-free working please clean and use the dispenser according
to the operating manual.
9. Repairs if necessary must be carried out by the manufacturer himself or authorized
service stations only by using original parts.
II. For a wide range of applications
Bottle top dispenser LLG- uni
TOPDISPENS
10 ml
Bottle top dispenser for aqueous liquids and acids. Valve block made of PP. Valve
system with Hastelloy metal spring in discharge channel. FIX adapter.
Art.-No.
9.283 806
Piston made of glass. Integrated glass dispensing
cylinder, plastic coated.
Bottle top dispenser LLG- uni
TOPDISPENS
50 ml
Bottle top dispenser for aqueous liquids and acids. Valve block made of PP. Valve
system with Hastelloy metal spring in discharge channel. FIX adapter.
Art.-No.
9.283 808
Piston made of glass. Integrated glass dispensing
cylinder, plastic coated.
Warning: Please see the technical information about polypropylene.
This dispenser can only be used with chemicals polyproylene resistant.
