Page 9 - Copyright Llaza, S.A. - May 2011
Assembly instructions
1. ASSEMBLY OF THE CASSETTE
A
Insert one of the side brackets into one end of
the square bar with the nut already placed on the
end of the tightening bolt. Ensure that the bar
goes all the way inside the bracket. Tighten the
allen bolt
(A)
firmly.
This will cause the nut to
slide along the internal ramp and become an-
chored on the interior walls of the bar.
A
Attach the cassette profile to the
side brackets using the screws
(B)
. On the other end, insert the
bracket into the square bar while
tightening the screws
(B)
to the
cassette profile. After this step
has been performed (and not
before), firmly tighten the bolt
(A)
as done with the bracket on the
other side.
A
B
B
IMPORTANT
Prior to installing the last side bracket, be sure to
insert the attachment plates
(C)
into the slot as
shown. These will be needed later for attaching
the intermediate cassette brackets, as well as
the components of the fabric gap kits in installa-
tions requiring them.
C
MONOBOX-400
