Page 14 - Copyright Llaza, S.A. - May 2011
Assembly instructions
7. ADJUSTMENT AND LEVELLING
Position the previously inserted slipper
(R)
so that the when the cassette is closed, it lines up with
the arm bracket.
Attach the joint-guard clip
(T)
at the location where the arm joint meets the profile.
These steps will make the MONOBOX-400 easier to close and prevent rubbing or damage to the
lacquer finish.
R
T
Thanks to attachment plate
(C)
, which was inserted into
the cassette profile at the beginning of the assembly, the
intermediate support can be attached to prevent to the
cassette profile from bulging.
This is necessary for awnings 4 metres in width or wider.
C
On the rear part of this intermediate bracket, there is a projection
that clips onto the ridge that runs along the cassette profile for
this purpose.
MONOBOX-400
